You can amend an existing permit, in the Permit Library or from the Application Tracker.

Locating the existing permit

If your permit was issued after 25th September 2017, it will be located in the Permit Library using the steps below.
If your permit was issued before 25th September 2017, use the Application Tracker to renew your permit.

Renew an existing permit in the Permit Library
Navigate to the permit the Permit Library.
On the OPEN TAB, search for the Permit using the table filters, for example the Permit ID.
To display more permit details, add columns to table by selecting TAB OPTIONS > Change columns. Then on the COLUMN SELECTOR tab, tick the checkbox against the column you wish to add and click APPLY.
Once the permit is selected, from ACTIONS FOR 1 ITEM button, select RENEW.

By selecting multiple permits, you can carry out bulk actions.
Make the changes to the Permit Period under Travel Details.
Upload any supporting documents under Attachments.
Click on Save button located at the bottom of the page; this will save the changes you have made on the Permit and be applied to all of the subsequent Cases sharing the Permit Number.

Any updates made to a Permit will be automatically applied to all subsequent Cases associated with the Permit no matter what status the Case is in.
If there are significant changes to the permit details, this will be seen as an Amendmendment or New permit application and fees may apply. See: Can I amend a permit without a fee applying?
For more information, read the Fact Sheet available on the NHVR Website.

Renew an existing permit in the Permit Library