Locating the existing permit

If your permit was issued by NHVR after 25th September 2017, it will be located in the Permit Library. You can amend your permit from here, follow the steps below.
However, It is quicker to amend your permit directly from Application tracker as it will automatically find and match permits based on the Permit ID number.

Amend an existing permit in the Permit Library

Navigate to the permit the Permit Library.

1. On the OPEN TAB, search for the Permit using the table filters, for example the Permit ID.
   
   
   
   

2. To display more permit details, add columns to table by selecting TAB OPTIONS > Change columns.  Then on the COLUMN SELECTOR tab, tick the checkbox against the column you wish to add and click APPLY.
   
   
   
   
   
   
   

3. Then tick to select the permit you wish to amend.

4. Once the permit is selected, from ACTIONS FOR 1 ITEM button, select AMEND. 

   
   
   
   

   By selecting multiple permits, you can carry out bulk actions.

5. This will open the new amend permit applicaiton in Application Tracker.

6. Click here for the next steps.
   
   

   Any updates made to a Permit will be automatically applied to all subsequent Cases associated with the Permit no matter what status the Case is in.

   If there are significant changes to the permit details, this will be seen as a New permit application and fees may apply. See: Can I amend a permit without a fee applying?

   For more information, read the Fact Sheet available on the NHVR Website.