...
Watch the Route Planner video.
...
With a permit application open, select Step 2 Route from the steps along the top of the screen
.
PLAN Tab
Select the Route Type – Single Route
.
...
GET ROUTE
...
- Select Step 3 Route.
- Select Plan tab.
- Select Single Route.
Use a Previous Route
- Click Get Route to use a previous route (Journey Planner or Route Planner
...
- ).
- Enter Route ID, if available or for Journey Planner
...
- select the Version
...
- .
- Click Load Route.
New Route
- Enter the start, end and waypoints using the full address details.
...
- The route will display on the interactive
...
- map and a Route Id will be automatically assigned (this can be reused on other permit applications).
...
- Rollover any point on the route and click to
...
- drag and drop to move route or waypoints.
Use the
...
drop-pin
...
to add new waypoints to
...
the route
...
, or rollover any point on the route to
...
drag and drop a waypoint.
...
Tip 
Select the drop-pin, click to blue for ON / or black for OFF- Delete or edit the waypoint
...
- using the buttons (including changing the waypoint
...
- labels).
- Drawing and measuring tools are also available
...
OPTIONS Button
...
RECALCULATE Button
...
If your Route is not displaying, use the RECALCULATE Button 
.
...
ROADS Tab
...
- (bottom left of the map display).
- If the route is not displaying, click recalculate.
- Select Options to change routing preference or routing constraints.
Roads tab
- Select the expand icon to see the list of roads under each road owner
...
- .
...
- Click on any road to add specific notes
...
- , such as local road name.
...
LAYERS Tab
...
Layers tab
- Use the slide tool to toggle the colours on the route layer or map layer
...
- . On this tab, you can also view and turn on/off the map layers. Use
...
- the Layer legend for a grouped view of available layers or the Layer list
...
- .
- Road layers are automatically set depending on the vehicle configuration you select. To turn on all layers, tick 'Show all layers'.
...
...
| Tip |
|---|
...
Map layers can be selected from either the |
...
Layers tab or the Stack icon |
...
on the |
...
map. Selections made in one list will |
...
show in the other. The |
...
Layers tab view allows you to |
...
see the full map when switching layers on / off. |
CONFIRM Tab
...
Confirm tab
- Select the Confirm tab.
- The Road Summary will display.
...
- Add any notes related to the application, at the bottom of the screen.
...
- Confirm the route using the
...
- checkbox.
- Save.
...
See
...
| icon | false |
|---|
...