Page Comparison

The NHVR processes permit renewals for all permit types issued by the NHVR. For all other permit renewals (including any travel within the Northern Territory and Western Australia), you will need to apply directly to the relevant the relevant state or territory road transport authority.

• If your original permit was issued by a state a state or territory road transport authority and authority and it is for a permit type now issued by the NHVR, you are eligible to renew your current permit through the NHVR.
• Renewal applications can be submitted for current permits and should be submitted no earlier than 6 weeks and no later than 16 days before the permit expires.
• Renewal applications submitted earlier than 6 weeks before permit expiry may not be processed.

To assist you in managing expiring permits, the NHVR Portal will now email a reminder notification 6 weeks prior to the expiry date and then a final reminder 24 hours beforehand. If the permit has expired and travel is still required, a new application must be submitted.

1. Navigate to Access permits > Application Tracker

Image Removed

1. Select RENEW.
   Image Removed
   

   Add a Reference name or title for the new renewal permit.

   Image Removed from the home page via the blue tile or the side navigation bar.
2. All saved permit applications for the active account will be listed.
3. Select Renew button.
4. Enter reference, click OK.
5. A Renew Permit Application screen will open.
6. From your existing permit, add the Issuer, Expiry Date and Permit ID numberExpiry. 
7. If there is an existing NHVR Permit, the system will automatically find and match the Permit details from the Permit ID number and update the renewal permit with existing information . 

   Image Removed

   Then simply, make the changes to the Permit Period under Travel Details and complete any freight details. (Skip to Step 6)(i.e. vehicle and route).
8. Complete the required details and follow the process at the top of the page.

If there is NOT an existing NHVR Permit,

you will be prompted to complete the

Image Removed

existing permit details (starting with Select Configuration button) before you complete the information on what is being amended. See below.

Renew a State or Territory Jurisdictional permit

1. Click Select Configuration.

2. Complete the required vehicle details for the vehicle type (these are different depending on the selected type).

3. If there is any missing vehicle information, the incomplete sections will appear in red.

   Remember,

4. Select the vehicle component tabs

   will also need completing, followed by ticking the 'I

   , complete details. Tick check box to confirm selection of the correct component

   ' checkbox

   for each vehicle component.

   Image Removed 
   
5. Make the changes to the Permit Period under Travel Details and complete any freight details.
   Image Removed
   

   Select Travel details, complete Permit Period.

6. The Route information will be completed by NHVR after the renewal permit is submitted.

   Image Removed
7. Upload

   Select Attachments, upload any supporting documents

   under Attachments

   . If renewing a permit issued by a State or Territory Jurisdiction, you will be prompted to upload the permit in this section.

    

   Image Removed

   Review your Contact information and check

8. Select Contacts, review information.

9. Select Confirmation. Check the Renew Permit Application details

   under Confirmation. If the details are correct, scroll to the bottom of the page and complete the required declarations and SUBMIT. Any changes you have made on the Permit will be applied to all of the subsequent Cases sharing the Permit Number.

   Image Removed

   You will then be prompted to add your payment details using a secure Credit Card payment gateway. Once PAY is selected and accepted, you

   . Complete the required declarations.

10. Click Submit renew permit application.

11. Complete payment.

12. The renewal application will be sent to NHVR for processing.

    Image Removed

    Noteiconfalse

Renewing your permit via the Permit Library

If your permit was issued by NHVR after 25th September 2017, you can renew your permit via the Permit Library.

1. Navigate to Access permits > Permit library.

2. Find and select the permit for renewal.

See: Can I amend a permit without a fee applying?

For more information, read

the Fact Sheet

available on the NHVR Website

Renewing your permit via the Permit Library

.