$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

      


  1. Click the green Select Configuration button at the top right of the screen.

  2. Choose an existing vehicle configuration  as the base for your build or you can chose custom to build your own.

  3. On the vehicle configuration screen, use the Add Components or Remove Components buttons at the top right of the screen to build your vehicle configuration.
    See Building a vehicle configuration

  4. Select each component individually by using the tabs to the right of the Overall tab.

  5. Select additional options for each component using the drop-down menu under each component tab. The vehicle image will adjust to show your selection.

  6. Complete all required component details under every tab.
  7. Confirm the selection of the corect components used in building the vehicle configuration (these will appear in red and you will not be able to submit your application unless they are completed).





  8. Click Save to return later or Next to move to the next step.

See the next Step: How to complete Step 2 of the permit application – Route

If there is missing information in any of the 6 Steps listed at the top of the screen, these will appear in red. These sections must be completed before you are able to submit your permit application.


  • No labels